Demo Created by Rahul Suresh
Webify Gold

Craftsmanship

What happens between the sketch and your hand

Our workshop has occupied the same three rooms since 1918. The tools have barely changed; neither has the standard.

Goldsmith pouring molten gold at the bench
Loose brilliant-cut diamond under inspection light
  1. 01

    The Sketch

    A piece is drawn at actual size, then again at four times scale. Proportion is settled on paper, never on screen.

  2. 02

    Shaping the Gold

    Ingots are poured, rolled and annealed until the metal accepts a curve without memory.

  3. 03

    Stone Selection

    Diamonds are viewed loose under north light. We reject roughly seven stones for every one we keep.

  4. 04

    Setting

    Claws are formed from the band itself rather than soldered on, so nothing can loosen at the joint.

  5. 05

    Hand Polishing

    Nine grades of abrasive, finishing on rouge-charged calico — around four hours per ring.

  6. 06

    Inspection & Packaging

    Ten times magnification, two inspectors, one struck signature. Then silk, lacquer and wax.